BIGTREETECH 3D Printer Part SKR V1.4 Turbo 32bit Control Board Smoothieboard&Marlin Open Source SKR V1.4 SKR V1.3 Upgrade Support TMC2209/TMC2208/TMC2130 Drivers (SKR V1.4 Turbo)

Package Included
1pc SKR V1.4 Turbo Board
1PC USB Cable

Product Features

  • Using 32bit main frequency 120MHz ARM level Cortex-M3 series LPC1769 Microprocessor
  • I2C, SPI and WIFI interfaces are reserved for convenience of DIY
  • Double z-axis interface, eliminating the trouble of external drive expansion Module
  • More fan interfaces: 1 way CNC fan, 3 way normally open fan
  • Plug-in external DC5V power supply module to supply power to TFT screen, BLtouch and Neopixel

Visit The Website For More Information…

BIGTREETECH TFT24 V1.1 Touch Screen Display Compatible 12864LCD 3D Printer Parts VS MKS TFT2.4 for SKR PRO SKR V1.3


※【Introduction】: BIGTREETECH TFT24-V1.1 is a small volume ultra-clear 3D printer display board. It can work in two modes.
The board is launched by the 3D printing team of Shenzhen BIGTREE Technology co., LTD. This board can replace LCD12864 for use.

※【Product Advantages】:

1 ) ARM Cortex-M3 series STM32F105RCT6 chip with 32-bit CPU 72MHz;
2 ) Upgrade the firmware by SD card. It is easy and convenient to operate.
3 ) This display board has higher compatibility. Users can select two work modes, they are UART serial port screen mode and 12864 screen mode.
4 ) Serial port screen mode supports two printing modes: SD card and U disk.

※【Product Parameters】:
Appearance size: 105*46mm
Installation size: detail information in TFT24-V1.1-SI
Microprocessor:STM32F105RCT6
Power Input:DC5V

1) When using 12864 screen mode, connect the port EXP1 and EXP2 to the motherboard. There is no touch function in this mode.
2) When using serial port screen mode, connect with TFT or aux-2 on the motherboard via RS232. In this mode, there is touch function.
3) The two modes correspond to two different firmwares, please connect wires according to the mode type of the flashed firmware.
※【Notes】:
1. The name of the firmware file in the SD card cannot be changed. (including capital and small letters)
2. Wiring process must be under the precondition of power outages. Users must check the correct connection of the circuit and the correct insertion of the drive before turning on electricity.
Pay attention to the wiring sequence and do not insert the wire inversely. Please refer to PIN file for detailed line order. If you have any questions, pls fell free to contact with us 【bigtreetech-us(Mailbox symbol)outlook.com】change Mailbox symbol to @

Product Features

  • ✓1.【Appearance size】: 105*46mm
  • ✓2.【Installation Size】: 100.08*41.1mm
  • ✓3.【Working modes】 :UART Serial Port Touch Screen and 12864 LCD can be selected;Microprocessor: STM32F105RCT6
  • ✓4.【How to connect with the SKR series or MKS series board】: https://www.youtube.com/watch?v=TeRSGmcd8A8
  • ✓5.【TFT24 V1.1 Manual and Firmware/Hardware】: https://github.com/bigtreetech/BIGTREETECH-TFT24-V1.1

Visit The Website For More Information…

BIGTREETECH Direct SKR V1.4 Turbo Control Board + 5pcsTMC2208 V3.0 UART Mode Driver 3D Printer Parts with LPC1769-120MHz Frequency VS SKR V1.3 / V1.4


※5.【TMC2208 V3.0 Manual】:
https://github.com/bigtreetech/BIGTREETECH-TMC2208-V3.0

※BIGTREETECH SKR V1.4/V1.4 Turbo GitHub:
https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4

※【SKR Motherboard Parameters】 :
Appearance size: 110*85mm
Mounting size: 102*76mm
Microprocessor: ARM Cortex-M3 CPU
Input voltage: DC12V-DC24V 5A-15A
Logic voltage:DC 3.3V
WIFI module:ESP-01S
Motor driver: Support TMC5161、TMC5160、TMC2209、TMC2225、TMC2208、TMC2130、ST820、LV8729、DRV8825、A4988 etc., independent external motor drive.
Driver working mode support: SPI、UART、STEP/DIR
Motor driver interface:X、Y、Z、E0、E1,5 way(Each has a closed loop drive interface) up to 256 subdivisions
Temperature sensor interface: TH0, TH1, TB, 3 channel 100K NTC Temperature

※BIGTREETECH SKR V1.4 motherboard is a 32-bit 3D printer motherboard optimized and upgraded by the 3D printing team of
Shenzhen Big Tree Technology CO., LTD. for the deficiencies of V1.3 version, especially suitable for small and medium-sized printers.

※1.SKR Motherboard Features: :
1)Plug-in external DC5V power supply module to supply power to TFT screen, BL touch and Neopixel.
2)Equipped with highly modular and open source firmware Marlin2.0, which is convenient for users to DIY and secondary development;
3)More fan interfaces: 1 way CNC fan, 3 way normally open fan;
4)Support 2.4, 2.8, 3.5 inch color touch screen, support LCD2004 screen, LCD12864 screen;
5)Upgrade and configure the firmware through SD card, which is simple, convenient and efficient;
6)The thermistor interface is protected by a bile capacitor pressurized resistor to enhance the resistance of the interface;
7)Support Resume Printing While Power Off, Filament Break Detection,Automatic Shutdown After Printing and so on;
8)High performance MOSFET tube, better heat dissipation effect;

Product Features

  • ※1.【SKR V1.4 Turbo】: Using 32-bit main frequency 120MHz ARM level Cortex-M3 series LPC1768 main control chip, the performance has been greatly improved;
  • ※2.【SKR V1.4 Turbo】: Using dedicated power chip M6130, support 12-24V power input;
  • ※3.【SKR V1.4 Turbo】: Double z-axis interface, eliminating the trouble of external drive expansion module;
  • ※4. 【TMC2208 Ultra-quiet】: Stealth Chop can make the engine work in extreme silence
  • ※5.【TMC2208 V3.0 Features】: Working Mode: Dir Step ##Microplver: 1/256 ##Microplyer Mode: Up to 256 ##Driver Current: Up to 2A ##Input Voltage: 4.75-35VDC ##Logical Voltage: 3.3V-5V ##Decibel: <10dB ##RDSON: ≤0.3Q ##Motor Phase Current: 1.2A RMS, 2.0A Peak

Visit The Website For More Information…