Noblik Optical Endstop 3D Printer Parts Optical Switch Sensor Photoelectric Light Control Limit Switch Module with 1M Cable

The Noblik brand is only authorized to sell Noblik branded goods. Buying goods from Noblik gives you a great shopping experience. Product Name:Lerdge Optical Endstop
The optical switch is a reliable stop/switch solution for any type of 3D printer/CNC/3D tool.
Advantages:Using optically transmissive principles of design,no loss,no noise,and longer life(more than one hundred thousand times).
Triggering is sensitive and quiet
Repeat positioning is in high accuracy.
Tips:Generally,the system need at least three optical switches.
Colour:Black
material:plastic
Package Contents:
1* photoelectric limit switch
1* 3pin XH2.54 matching switch cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Product Features

  • weight:16g
  • Item Type:Switch
  • Model Number:Optical Endstop
  • Condition:New
  • range:3d printer parts

Visit The Website For More Information…

Creality 3D Upgraded BLTouch V1 Auto Bed Leveling Sensor Kit Accessories for Creality 3D Ender 3/Ender 3 Pro,Ender 5, CR-10/10 S4/10 S5, CR 10S, CR 20/20 Pro

NOTEļ¼š
The circuit wiring of CR-10 S4, CR-10 S5, CR 20, CR20 Pro are different from the manual, while Ender 3,Ender 3 Pro,Ender 5, CR-10 are same as the manual.
1. Use USB cable to connect CR-10 S4, CR-10 S5, CR 20, CR20 Pro with computer to flash the firmware, the ISP connector and ISP pinboard are not needed.
2. No need to plug the pinboard A to mainboard of CR-10 S4, CR-10 S5, CR 20, CR20 Pro, just insert the connectors into the mainboard D11 pins and unplug Z limit switch then insert the connectors into the Z port.

Features:
An auto leveling sensor for 3D Printer based on open-source
Simple, high-quality, smart and precise

Item type:Auto Press Bed Leveling Kit
Material: Plastic
Color: As pictures.

Packing Includes:
1 set of auto bed Leveling Kit

Firmware:
Please move to the Creality Official Website to download.

Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.
2. Please allow 1-3cm measuring deviation due to manual measurement.
If the BL touch doesn’t work well. you can reference the website: www.antclabs.com/wiring3

After sale service and technical support
If you have any issue, please kindly contact us. We will reply as soon as possible within 24 hours.
We will offer you professional customer support and strive our best to offer your solutions.

Product Features

  • Application: Suitable for Ender 3/Ender 3 Pro,Ender 5, CR-10/10 S4/10 S5, CR 10S, CR 20/20 Pro (can’t use for CR 10S Pro). It is an auto leveling sensor for 3D Printer based on open-source.
  • IMPORTANT NOTE:Flash the firmware before install, and the circuit wiring of CR-10 S4, CR-10 S5, CR 20, CR20 Pro are different from the manual(please check the product image to see detail). Please visit the Creality Official Website to download firmware.
  • Easy to Use: This auto bed leveling sensor make it easier to leveling the hot bed, which can precisely measure the tilt of Bed surface. Bed leveling is not a problem anymore.
  • Intelligence, self – check and alarm. Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
  • Package includes: 1 set of auto bed Leveling Kit (as image shows). If you have any question about this product, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you.

Click Here If You Need More Detailed Info…

Creality BL Touch 3D Printer Upgraded Auto Bed Leveling Sensor Kit for Cr-10/Ender 3/Ender 3 Pro/Ender 5/CR 10S/CR-10 S4/S5/CR 20/20 Pro

Product Features

  • Awesome BLTouch Upgraded Kit: Unlike the inductive probe, Our Creality BLTouch auto bed leveling kit was a touch-based 3D printer bed leveling probe which enables automatic bed leveling on your 3D printer, regardless of print surface. This touch sensor works perfectly with any surface, from glass to blue tape or woods, metals and so on.
  • Widely Application: Used Creality for Ender-3 / Ender-3s / Ender-3 Pro /Ender 5 /CR-10 / CR-10S/ CR 10S4/ CR 10S5/ CR-20 / CR-20 Pro and more 3D Printer(Please flash the firmware first, with ISP cable to connetct computer and printer while CR 10Scan be connected directly to computer by USB)
  • High-Precision: BLTouch fulfilled simple structure and high precision by using progressively designed solenoid and hall sensor. BLTouch’s Standard Deviation in repeatability is around 0.005mm that make it easier to use and to increase the success rate of shaping.
  • Genuine High Quality Set: Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install.
  • Firmware:Please move to the Creality Official Website to download: https://creality3d.cn/products/ If you have any question, please feel free to contact us!

Click Here If You Need More Detailed Info…