Nozzle size: 0.2mm，0.3mm，0.4mm optional
Machine size: 423*460*470mm
Machine weight: 7kg
Packing weight:8.5kg Display: 3.5 inches full color touch screen
Power failure resume print: Support
Environmental temperature: 8-40°C
Slicing software: TRONXY exclusive slice software
Operate software: Repetier-Host. Cura
Power input: 110V/220V AC，50/60Hz
Power output: DC 12V 20A
Positioning accuracy: X/Y0.0125mm，Z0.02mm
Print speed: 2-100mm/s(advs 60mm/s)
Print thickness: 0.1mm-0.4mm optional
Connection:USB interface. TF card
Print color: single color
Materials support: PLA.ABS.HIPS.WOOD.PC.PVC
Environmental humidity: 20-80%
Machine materials: Aluminum and sheet metal
File format: STL.OBJ.DAE.AMF.G-Code
Certificates: CE FCC
What’s in the box:
Base 1+Rack 1+Controller 1+Filament rack 1+Power supply 1+cross screwdriver 1+straight screwdriver 1+ Open end fixed wrench 1 + USB wiring 1
+ hexagon wrench 4 + Tie 5 + Card reader (including 1pcs 8G TF card) 1 + Power line 1 + 10 meters color (color random) 1 + Textured stickers 1
Simple speed assembly—Just four steps to complete the combination easily
Strict Test: Strict testing for key components before delivery and life-time technical supports.
High wear pulley:Smoother, less noise
Integrated structure : Delicate and compact and moves well
Sticky platform sticker : Instead of traditional American texture glue, no longer warped edge, non-stick, waste.
Print plate : All – metal platform floor is more heat – resistant and durable than conventional acrylic
Extruder Adopt new dual fan structure, more stable printing performance, better heat dissipation
- Full Color Touch Screen—- It’s easier to operate ,Supported operating systems windows 7 and later, Mac OS X, Linux. Monoprice Quality Assurance/Technical Assistance
- Support For Most Filament Types—- The heated build plate and wide range of extruder temperatures allow this printer to work with a lot of filament, from basic filaments, such as PLA, to more advanced materials, such as conductive PLA, wood and metal composites, or dissolvable PVA. with this printer having a lined throat your better off sticking to PLA TPU and PETG and avoiding higher temp filaments like PC or nylon.
- Power Failure Recovery——TRONXY XY-2 the break-resuming capacity can save real-time printing status and RESUME THE PRINTING JOB exactly at the same place WHERE IT HAS BEEN STOPPED. This add-on totally DRIVES AWAY THE HASSLE OF REPETITIVE AND TIME-TIME CONSUMING PRINTING JOBS CAUSED BY UNEXPECTED POWER OUTAGE. Totally get you out of worries about printing large-size 3D models.
- Ready To Print—-Semi-assembled design. Just 4 steps to complete the combination easily .you can easy assembled them within 20 min. The package include sample PLA filament and a 8G MicroSD card with preinstalled models, you can begin your printing once you get my product from the courier
- After-Sales Service— [email protected] TRONXY will offer lifetime technical support and give satisfactory response to you. For the jet lag or Chinese New Year holidays etc, we may not be able to respond to you in time during those special periods, but we can guarantee that we will reply to it within 24 hours under normal conditions. Please wait patiently, don’t rush to give us a bad review. Your trust will give us biggest motivation.
Click Here For More Information
※【Introduction】: BIGTREETECH TFT24-V1.1 is a small volume ultra-clear 3D printer display board. It can work in two modes.
The board is launched by the 3D printing team of Shenzhen BIGTREE Technology co., LTD. This board can replace LCD12864 for use.
1 ） ARM Cortex-M3 series STM32F105RCT6 chip with 32-bit CPU 72MHz;
2 ） Upgrade the firmware by SD card. It is easy and convenient to operate.
3 ） This display board has higher compatibility. Users can select two work modes, they are UART serial port screen mode and 12864 screen mode.
4 ） Serial port screen mode supports two printing modes: SD card and U disk.
Appearance size: 105*46mm
Installation size: detail information in TFT24-V1.1-SI
1) When using 12864 screen mode, connect the port EXP1 and EXP2 to the motherboard. There is no touch function in this mode.
2) When using serial port screen mode, connect with TFT or aux-2 on the motherboard via RS232. In this mode, there is touch function.
3) The two modes correspond to two different firmwares, please connect wires according to the mode type of the flashed firmware.
1. The name of the firmware file in the SD card cannot be changed. (including capital and small letters)
2. Wiring process must be under the precondition of power outages. Users must check the correct connection of the circuit and the correct insertion of the drive before turning on electricity.
Pay attention to the wiring sequence and do not insert the wire inversely. Please refer to PIN file for detailed line order. If you have any questions, pls fell free to contact with us 【bigtreetech-us(Mailbox symbol)outlook.com】change Mailbox symbol to @
- ✓1.【Appearance size】: 105*46mm
- ✓2.【Installation Size】: 100.08*41.1mm
- ✓3.【Working modes】 :UART Serial Port Touch Screen and 12864 LCD can be selected;Microprocessor: STM32F105RCT6
- ✓4.【How to connect with the SKR series or MKS series board】: https://www.youtube.com/watch?v=TeRSGmcd8A8
- ✓5.【TFT24 V1.1 Manual and Firmware/Hardware】: https://github.com/bigtreetech/BIGTREETECH-TFT24-V1.1
Visit The Website For More Information…
Precision and Applications
With an LCD resolution of 2560×1440 (2k), XY Axis precision of 47.25µm, it is ideal for medical, dental and jewelry applications. Vertical printing speeds of up to 10-40mm/h.
Stable and Quiet
Orange 30 LCD UV Printer is an SLA UV-resin printer. Only the Z axis moves, resulting in fewer failures and quieter operation.
Auto-leveling, automatic resin mixing, and vat cleaning function make printing easier and more convenient.
Light Source: UV Integrated Light(wavelength 405nm)
LCD Screen Resolution: 2K (2560*1440)
XY Resolution: 47.25μm
Layer Thickness: 0.01-0.1mm
Printing Speed: 30 mm/h
Power Requirements: 110-220V, 12DC/5A 50-60W
Software: LongerWave, ChiTubox
Operation System: Windows7/8/10 64 bit, MAC OS
3D PRINTER * 1
Steel Shovel * 1
Screw Drive * 1; Gloves * 1
3M Funnel * 1; Poker Cards * 5
Power Adater * 1; Power Plug * 1
USB Disk * 1; User Instruction * 1
- 【High Precision】Orange 30 is a higher precision resin 3d printer, with built-in 2k LCD screen at 2560×1440 resolution and 47.25µm pixel size, offering bigger size of printing at 4.72 x 2.68x 6.69 inch; With solid linear guide and special slider design, it will ensure the accuracy and stable of Z axis.
- 【Average UV Lighting】Integrated with matrix UV LED Design, Orange 30 provides better printing performance since the matrix illumination provides better uniformity, higher intensity and shorter time of curing.
- 【Smart and Convenient】Temperature detection system included. The system will stop printing to protect system when temperature is too high. With high efficiency cooling system, it will prolong the lifespan of this 3D printer.
- 【Fast Slicing Software】Easy work with 2.8” touch screen to operate and preview the printing process. LONGER self-developed slice software allows you to quickly output 100M slicing file within ONE minute, triple times faster than others. And it supports Chitubox to play as well.
- 【Warranty & Service】We are providing 12-Months warranty (5.5” LCD Screen and FEP film excluded) and lifetime technical support for this item 3d printer. Please feel free to contact us and join our community to get support if there’s any question on operation.
Click Here For More Information