►Classic Red color.
►UPGRADE: Perfect replacement for Creality 3D Printers ENDER3, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
►This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware.
►Support: 1.75mm Filament .
►This Kit NOT include the instruction manual, we need to DIY 🙂
►1 x WINSINN CR-10 extruder Upgrade Kit (All Accessories show as Picture 1)
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
- ✔️Classic Red color.
- ✔️UPGRADE: Perfect replacement for Creality 3D Printers Ender 3, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
- ✔️This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware.
- ✔️For 1.75mm Filament. This Kit NOT include the instruction manual, we need to DIY 🙂
- ✔️Made by WINSINN, make sure the “WINSINN” label on the box for our after-sales service.
Visit The Website For More Information…
100% Creality Original,Compatible with all Creality 3D Printer
Model Number:Limit Switch
Max Voltage:250V Max Current:5A
Board size: 20 x 20 x 7 mm/ 0.8 x 0.8 x 0.3 inch
5 PCS * Limit Switch
After-sales Guarantee: we are responsable for our every product, if you received defective or item did not work great, please feel free to contact us, we will resend you replacement for free or refund you.
- Creality 3D Printer parts, compatible with all creality 3d printer.
- DIY Must 3D Printer switch: With trigger indicator, 3 Pin N/O N/C control, easy to use Micro Switch;
- Optical Endstops swich with 1M Photoelectric Light Control.
- Replace your old or broken CR10 limit switch with a new one.A great accessory for 3D printer.Small sized, easy to install.
- Warm Tips: Generally, the printer DIY system need at least three optical switches.
Visit The Website For More Information…
Compatibility: Compatible with all 1.75mm PLA ABS 3D printer, works with Anet A8.
Installation: connecting by the outer thread of the quick fitting.
Disassemble: press and hold the blue or black end of the quick fitting and pull out the tube.
Attention: small 3D printer accessories, please keep away from children.
➤Widely applied for connecting extruders, PTFE fittings.
➤Pneumatic fitting supports turn 360 freely, Easy to install and remove.
➤2 end connections of quick fittings is able to bear greater and stronger impulse but won’t coming off.
Smooth surface, Non-stick & Corrosion resistance.
Environmentally friendly and pollution free & Durable.
Self-lubricating: can convey materials smoothly with smallest friction coefficient.
High&low temperature resistance: usable temperature -190℃~+260℃, almost unaffected by temperature.
Material: PTFE (Poly Tetra Fluoro Ethylene)
Outside Diameter: 4mm
Inside Diameter: 2mm
Inner diameter(blue end): 4mm
Material: copper and plastic
Inner diameter(black end): 4mm
Material: stainless steel and plastic
Color:black + silver
2 x 2M PTFE tube (2.0mm ID/4.0mm OD)
4 x PC4-M6 fittings
4 x PC4-M10 fittings
➤If you have any question, just click on the “Contact Seller” button or leave your question into “Customer Questions & Answers” .
- Teflon Tube: Durable material: PTFE; Length: 2m; OD 4mm, ID 2mm
- PC4-M6 fittings: thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable
- PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of stainless steel and plastic, high hardness, antioxidtion, anti corrosion
- Compatibility: compatible with all 1.75mm PLA ABS 3D printer
- Installation: connecting by the outer thread of the quick fitting, easy to install
Detailed Information available on our Homepage…