Noblik Optical Endstop 3D Printer Parts Optical Switch Sensor Photoelectric Light Control Limit Switch Module with 1M Cable

The Noblik brand is only authorized to sell Noblik branded goods. Buying goods from Noblik gives you a great shopping experience. Product Name:Lerdge Optical Endstop
The optical switch is a reliable stop/switch solution for any type of 3D printer/CNC/3D tool.
Advantages:Using optically transmissive principles of design,no loss,no noise,and longer life(more than one hundred thousand times).
Triggering is sensitive and quiet
Repeat positioning is in high accuracy.
Tips:Generally,the system need at least three optical switches.
Colour:Black
material:plastic
Package Contents:
1* photoelectric limit switch
1* 3pin XH2.54 matching switch cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Product Features

  • weight:16g
  • Item Type:Switch
  • Model Number:Optical Endstop
  • Condition:New
  • range:3d printer parts

Visit The Website For More Information…

Aibecy Anet 3D Printer Parts End Stop Endstop Limit Switches Plug Control with 24AWG Cable 2 Pins Switch for Anet A8 Plus Desktop 3D Printer

Features:
The endstop Limit Switches kit fits for Anet A8 Plus 3D printer.
The package includes 3pcs limit switches(2pin), one of one with pulley and the other two without pulley; 3pcs cables, 750mm(1pcs) and 500mm(2pcs).
Triggering is sensitive, repeat positioning is in high accuracy, with a longer service life.
Small size, easy installation, just plug and play.
100% brand new and high quality, perfect 3D printer parts.

Specifications:
Brand: Anet
Suitable: For Anet A8 Plus 3D Printer
Cable Length: 750mm, 2pin(1pcs); 500mm, 2pin(2pcs)
Package Size: 9 * 8 * 2.5cm / 3.5 * 3.1 * 1in
Package Weight: 23g / 0.8oz

Package List:
1 * X Limit Switch Cable
1 * Y Limit Switch Cable
1 * Z Limit Switch Cable
2 * Limit Switch
1 * Limit Switch with Pulley

Product Features

  • The endstop Limit Switches kit fits for Anet A8 Plus 3D printer.
  • The package includes 3pcs limit switches(2pin), one of one with pulley and the other two without pulley; 3pcs cables, 750mm(1pcs) and 500mm(2pcs).
  • Triggering is sensitive, repeat positioning is in high accuracy, with a longer service life.
  • Small size, easy installation, just plug and play.
  • 100% brand new and high quality, perfect 3D printer parts.

Visit The Website For More Information…

BIGTREETECH TFT24 V1.1 Touch Screen Display Compatible 12864LCD 3D Printer Parts VS MKS TFT2.4 for SKR PRO SKR V1.3


※【Introduction】: BIGTREETECH TFT24-V1.1 is a small volume ultra-clear 3D printer display board. It can work in two modes.
The board is launched by the 3D printing team of Shenzhen BIGTREE Technology co., LTD. This board can replace LCD12864 for use.

※【Product Advantages】:

1 ) ARM Cortex-M3 series STM32F105RCT6 chip with 32-bit CPU 72MHz;
2 ) Upgrade the firmware by SD card. It is easy and convenient to operate.
3 ) This display board has higher compatibility. Users can select two work modes, they are UART serial port screen mode and 12864 screen mode.
4 ) Serial port screen mode supports two printing modes: SD card and U disk.

※【Product Parameters】:
Appearance size: 105*46mm
Installation size: detail information in TFT24-V1.1-SI
Microprocessor:STM32F105RCT6
Power Input:DC5V

1) When using 12864 screen mode, connect the port EXP1 and EXP2 to the motherboard. There is no touch function in this mode.
2) When using serial port screen mode, connect with TFT or aux-2 on the motherboard via RS232. In this mode, there is touch function.
3) The two modes correspond to two different firmwares, please connect wires according to the mode type of the flashed firmware.
※【Notes】:
1. The name of the firmware file in the SD card cannot be changed. (including capital and small letters)
2. Wiring process must be under the precondition of power outages. Users must check the correct connection of the circuit and the correct insertion of the drive before turning on electricity.
Pay attention to the wiring sequence and do not insert the wire inversely. Please refer to PIN file for detailed line order. If you have any questions, pls fell free to contact with us 【bigtreetech-us(Mailbox symbol)outlook.com】change Mailbox symbol to @

Product Features

  • ✓1.【Appearance size】: 105*46mm
  • ✓2.【Installation Size】: 100.08*41.1mm
  • ✓3.【Working modes】 :UART Serial Port Touch Screen and 12864 LCD can be selected;Microprocessor: STM32F105RCT6
  • ✓4.【How to connect with the SKR series or MKS series board】: https://www.youtube.com/watch?v=TeRSGmcd8A8
  • ✓5.【TFT24 V1.1 Manual and Firmware/Hardware】: https://github.com/bigtreetech/BIGTREETECH-TFT24-V1.1

Visit The Website For More Information…